Archives

Archive by

When the need for LCD flat panel displays chooses back lighting lighting, designers often face should use white led with a pure white light or the RGB light source of the dilemma. White led drive and RGB drive is different, for example, used for portable electronic devices in the display, or general back lighting lighting applications to drive the highly RGB led of have no low inductance low noise led drive IC, and standard white led drive IC have different performance standards, this is because RGB led and white led toward the voltage is different, so need different IC architecture. Usually RGB led strip lighting will have a coil of ON/OFF interface and 3 separate resistance can be programmed to control LED current source dimmer and brightness, in addition, it will adopt the “white” mode to optimize red and green and blue LED the current ratio, so, in all three RGB LED programming for when to obtain the best ON the spectrum of.

Different lighting source choice of backlighting

To provide for the display back lighting cold cathode fluorescent lighting (CCFL) has a limited chromatography, and colour bright enough. RGB LED actually expanded

Jun 21st, 2012 | Filed under LED Light

In the present scenario the current environment situation enforces people to raise their knowledge about how to make their environment friendly. With this accordance power saving comes first as natural resources are limited and hence the quest for efficient lighting energy is increasing in the current era.

Researchers always try their best to create a one which can be affordable in any circumstances. In this regard LED tube is the one of the best to lighting your life with the replacement of incandescent light & also eco-friendly. So before taking any decision we should know why we need a changeover in this field.

There are some few points which can help you to acquire knowledge about LED tube.

• First of all LED (Light emitting diode) tube produces better light than incandescent bulbs, and this is the fact that most of the offices and homes are using it.

• You might have seen that lighting of your home consumes about 20% of entire supply. So if you can lower down this, you might save your budget. It is already tested that LED tube consumes less up to 60% than incandescent bulbs.

• Incase of fluorescent light one person has to weird it

Jun 20th, 2012 | Filed under LED Light

There are a lot of customers demand not conventional LED strips with special specifications, the strips need to custom. But because LED strips are not familiar with some of the technical parameters, many requirements of the customers do not meet the technical requirements, even if done, its use will also be affected. Here

Jun 19th, 2012 | Filed under LED Light

1 normal tunnel light and LED the function of the tunnel light more choice

At present the most tunnel lighting is high pressure sodium lamp as the light source, time machine but high-pressure sodium lamp uv radiation in form, color rendering, visual sensitive characteristics, power specifications, brightness control, there are many shortcomings,

Jun 18th, 2012 | Filed under LED Light

One-hundred-and-thirty years ago, Thomas Edison completed the first successful sustained test of the incandescent light bulb. With some incremental improvements along the way, Edison’s basic technology has lit the world ever since. This is about to change. We are on the cusp of a semiconductor-based lighting revolution that will ultimately replace Edison’s bulbs with a far more energy-efficient lighting solution. Solid state LED lighting will eventually replace almost all of the hundreds of billions of incandescent and fluorescent lights in use around the world today. In fact, as a step along this path, President Obama last June unveiled new, stricter lighting standards that will support the phasing out of incandescent bulbs (which already are banned in parts of Europe).

To understand just how

Jun 18th, 2012 | Filed under LED Light

Camera flash tech is nearly as historic as the camera itself. The flash bulb launched a mini industrial revolution, continued on by the cube and the battery-operated units. Now the LED flash promises to create another powerful shift in the way photographers utilize light.

LED stands for light-emitting diode. First unveiled in 1962, the diodes projected a dim reddish aura. They’re now available across the color spectrum, plus the infrared and ultraviolet. LEDs, once dark and reddish, are now brilliantly, to be frank, brilliant, making them ideal for taking photos.

Most flash units today incorporate Xenon.

Jun 15th, 2012 | Filed under LED Light

When it comes time to choose a lighting system for your emergency vehicle, you will have quite a few decisions you will have to make. There are many different styles of lighting available, but you should definitely confine your search to lightbar LED systems. Why? They are better than almost every other lighting system around. Here is why you should choose a lightbar LED system…

Overall, lightbar LED systems offer higher levels of visibility than any other style of lighting around. The main job of a lightbar LED system is to make sure you get noticed when you are driving down the road, and they do just that. They are bright, they cut through rain and fog well, and almost everyone will notice them when they are on. This is the main reason you should

Jun 15th, 2012 | Filed under LED Light

LED Eco Lighting have released a new calculator which enables you to work out the benefits, both for the environment and your wallet, of making the switch to LED Lights.

With the ever increasing production of LED Lights, the initial cost is slowly but surely dropping as demand increases. We all want to make things better for the environment, but until recently the initial outlay for good quality LED lights has been somewhat inhibiting for the average household to make the switch.

But now, more and more people are realising

Jun 14th, 2012 | Filed under LED Light

Classify led strip lighting according to the waterproof hierarchies:

IP is the abbreviation of Ingress Protection, IP level is the hell protection grade of electrical equipment for preventing exterior invading into the electrical equipment. It comes from the International Electro technical Commission standard IEC 60529, the standard is adopted by American as its national standards in 2004.

For the protection of shell for electrical

Jun 13th, 2012 | Filed under LED Light

Led Tube is made by the Led light,The light source of the led Led panel light is high brigtness white led light or warm  white led light with  some features such as high effective  ,low power ,long life ,easy to control ,non-maintenance ,safe and environmental etc .It is a new cold light source .

The Led panel light can be used in hospital ,office ,bank ,hotel and

some other place that indoor .For more features  , pls read the commonets as

Jun 12th, 2012 | Filed under LED Light