LEDiL

Nov 23rd, 2011 | Posted by | Filed under LED Light

STRADA-F Series:
STRADA-F Series are compact lenses, 15.4mm wide x 19.6mm long, molded from UV-stabilized optical-grade PMMA plastic, boasting over 90% transmission efficiency. STRADA-FT, 8.2mm high, directs light in a forward peak of 55 degrees. The slightly taller (10.8mm) STRADA-FW gives a wider emitting pattern in the forward peak of 55 degrees. STRADA-F Series is optimized optimum performance with LEDs from Cree, Philips Lumileds, Osram, Nichia and others.

In addition to the outstanding optical performance and reliability designed into STRADA-F Series, ease of assembly is also optimized. Locating pins ensure precise alignment on the lens over the focal point on the LED light source. The product can be obtained with or without pre-mounted polyurethane foam adhesive tape as well as being designed to fasten to the PCB using secondary screws.

With the help of STRADA-F Series, LEDiL?¡¥s STRADA family of products ¡§C 10 variations offered in various symmetrical and asymmetrical light distribution patterns – might be combined in a single fixture to allow for manufacturers of wide-area light fixtures ¡§C for example roadway lighting, parking lot lighting, security lighting, vertical wall packs, yard lighting and shoe boxes ¡§C to design efficient and compact products that meet IESNA standards. Challenging light cut-off requirements could be satisfied with simple reflective shades incorporated inside fixture design. LEDiL?¡¥s team of optical and mechanical engineers is available to assist its customers with the right selection of STRADA products for every application.

Lighting designers are rapidly developing LED-based solutions that use the up-to 80% reduction in power afforded by solid-state technology along with the long-life span of LEDs. LEDiL?¡¥s STRADA Series of lenses allow immediate deployment ¡§C without tooling investment ¡§C of LED-based fixtures to exchange traditional metal halide, high-pressure sodium, and also other traditional light sources utilised in exterior lighting applications. The high efficiency of STRADA Series products helps designers achieve Energy Star compliance by making use of fewer LEDs and electronic components.

MINNIE Reflector Series:
LEDiL?¡¥s precision-molded MR11 (32.4mm and 35mm diameter versions) MINNIE reflector series provides for rapid deployment of new lighting solutions using Cree MT-G LEDs. Lighting designers now have a more reliable, low-cost choice than traditional drawn or spun metallic reflectors.

Molded from durable polycarbonate plastic resin, the optimal optical geometric design achieved inside the design process is reproduced inside the molding process. The reflectors, available in 26, 36 and 74 degree FWHM (full width half modulation) beam patterns, are finished within an aluminum coating with a protective lacquer finish and supply greater than 90% optical efficiency. The product or service is also available with a secondary adapter base that easily fastens to the PCB for quick attachment with the reflector cup to the adapter, making MINNIE quicker to mount than traditional metallic reflectors.

Lighting designers are rapidly developing LED-based solutions that use the up-to 80% reduction in power afforded by solid-state technology as well as long-life span of LEDs. LEDiL?¡¥s MINNIE reflectors allow immediate deployment ¡§C without the need of tooling investment ¡§C of LED-based fixtures to change traditional halogen or incandescent bulbs in applications where directed light is favored, including in spotlights in retail displays, meeting rooms, or perhaps restaurants and bars. MINNIE reflectors can also be ideal for use in museums and galleries as there are no damaging UV rays or heat within the beam.

JULIA-A Rotationally Symmetrical Lens Series:
JULIA-A is often a rotationally symmetrical lens that produces batwing light emission pattern, that permits LEDs such as Cree?¡¥s XP Series or Philips Lumileds?¡¥ Rebel and Rebel-ES Series, to accomplish over 90% uniformity on display surfaces 50 ¡§C 100mm through the PCB. Since these and other similar LEDs are inherently point-sources of sunshine, JULIA-A lenses enable the LEDs to use in a wide-variety of backlighting applications.

Typical applications include backlight roadway signage and channel letters, architectural effect lighting, under-cabinet and cove lighting, and museum and display lights. Other enabled applications include 360? warning beacons, backlighting of emergency lights and exit signs, and interior mood lighting on vehicles including buses, rail coach cars and commercial aircraft.
JULIA-A achieves light distribution with over 90% uniformity when directed to a parallel surface located between 50mm and 100mm through the PCB. Recommended LED spacing is 100mm. The lens is fewer than 19mm in diameter and only 4.66mm tall (4.81mm with optional tape). Precise mounting is ensured because of the addition of two 0.63mm mounting pins along with the product is available with optional automotive-grade polyurethane foam mounting tape for easy and reliable installation. LEDiL molds JULIA-A from optical-grade, UV-stabilized PMMA plastic.

Lighting designers are rapidly developing LED-based solutions that make use of the up-to 80% reduction in power afforded by solid-state technology as well as the long-life span of LEDs. LEDiL?¡¥s JULIA-A Series allows today?¡¥s efficient and cost-effective high-power LEDs to be used in a wide-range of backlighting applications, replacing traditional incandescent, neon, and halogen light sources. The high efficiency of JULIA-A lenses helps designers achieve Energy Star compliance using fewer LEDs and electronic components.LEDiL expands its popular precision-engineered STRADA Series to feature the new STRADA-F Series lens family. Furthermore LEDiL introduces the precision-molded MR11 (32.4mm and 35mm diameter versions) MINNIE reflector series and JULIA-A lenses to the already extensive range of precision-engineered rotationally symmetrical lens.

Tags:
  • http://www.howtoremoveskintagsyourself.com how to remove skin tags yourself

    I found the following extremely related”The press is the best instrument for enlightening the mind of man, and improving him as a rational, moral and social being” – Thomas Jefferson

  • http://www.projdecnauzi.com Andrew Pelt

    I simply want to tell you that I’m beginner to blogging and absolutely enjoyed you’re web-site. Most likely I’m going to bookmark your site . You amazingly come with good articles and reviews. Regards for sharing your web page.

  • http://signx.info/sign-gallery/street-sign-boston exit signs

    I do believe all of the concepts you’ve introduced to your post. They are very convincing and can certainly work. Nonetheless, the posts are very quick for starters. May you please extend them a bit from subsequent time? Thanks for the post.

  • http://sawdwadawd.awdadw Ivan Soose

    Thanks for the art, previously interesting and compelling. I have found my way here through Google, I’ll go back one more time :)

  • http://www.pegperegoreviews.com Pegperego

    I think one of your advertisements caused my web browser to resize, you may well want to put that on your blacklist.