Archives

Posts Tagged ‘Led panel light’
You need a Led panel light

Led Tube is made by the Led light,The light source of the led Led panel light is high brigtness white led light or warm  white led light with  some features such as high effective  ,low power ,long life ,easy to control ,non-maintenance ,safe and environmental etc .It is a new cold light source .

The Led panel light can be used in hospital ,office ,bank ,hotel and

some other place that indoor .For more features  , pls read the commonets as

Jun 12th, 2012 | Filed under LED Light
Some technical details about Led panel light

Led Tube: Led panel light source is known as long life lamp. Solid cold light source, epoxy resin, light body and no loose parts, there is no filament light easy to burn, heat accumulation, light and rapid decline of errors errors, life of up to 50,000 to 100,000 hours, longer life than conventional light sources more than 10 times. Drive power requirements chip itself is less than 0.5w, switching frequency requirements mandate greater than the 120hz, so that while the occurrence frequency disturbance can be seen blinking.

Led panel light built-in driver IC chip package should help drive the quick cooling die, if the die (die) in the copper binding on the indirect and indirect extension of a pin to package, easy to indirect welding in the pcb board thermal conductivity of copper rapidly (Figure 1). If a similar 4x4mm silicon die on Britain to end eternal sub-300-1000ma of current, confirmed the power to determine the will heat the chip itself, the physical layout of cooling is also essential.

Led

May 30th, 2012 | Filed under LED Light
Led panel lighting specialized details

Led Tube: Led panel light source is known as long life lamp. Solid cold light source, epoxy resin, light body and no loose parts, there is no filament light easy to burn, heat accumulation, light and rapid decline of errors errors, life of up to 50,000 to 100,000 hours, longer life than conventional light sources more than 10 times. Drive power requirements chip itself is less than 0.5w, switching frequency requirements mandate greater than the 120hz, so that while the occurrence frequency disturbance can be seen blinking.

Led panel light built-in driver IC chip package should help drive the quick cooling die, if the die (die) in the copper binding on the indirect and indirect extension of a pin to package, easy to indirect welding in the pcb board thermal conductivity of copper rapidly (Figure 1). If a similar 4x4mm silicon die on Britain to end eternal sub-300-1000ma of current, confirmed the power to determine the will heat the chip itself, the physical layout of cooling is also essential.

Led panel light lamps on the low-voltage driver IC requirements:

1.Led panel light driver chip area which should be the nominal output voltage to meet the dc8-40v, use the area to cover the needs of more pressure if greater than 45v; ac12v or 24v output complex with the bridge rectifier output voltage Power voltage fluctuation, especially at high voltage DC output voltage will be high if you can not drive less responsive ic wide voltage areas, often overstating the power off when power will be breakdown, led light source also led to survival.

Apr 12th, 2012 | Filed under LED Light
Led panel bulb indoor application

Led Tube in indoor lighting applications are at a preliminary stage, this is because the cost is too high lumen factor, for another, LED panel light too few types of indoor lighting, lighting designers suffer no choice, but Indoor lighting products are promoted to the obstacle. Think, LED panel light indoor lighting product development and promotion should focus on the following five areas:

1, Products

Interior Lighting the traditional lamp can be called under various names, Led panel light, Led tube, Led spotlight, such as commercial lighting and the composition of the two major areas of home lighting, indoor lighting dominate the direction, but now applied to indoor lighting LED products is LEDtube, LED panel light floor tiles and other decorative lighting, other common traditional lighting LED light source applications are rare, but a huge potential market, no doubt, with the LED panel light to enhance light efficiency and lower prices, who first developed a series Led panel light products will come to occupy the market opportunities.

Apr 11th, 2012 | Filed under LED Light