Archives

Posts Tagged ‘Led Tube’
Some points that can affect the Led Tube

Though the  people can get Led Tube products from many different way , but choice is also very important to consider .

Many led display desigen think all of the qulity of the led display should be the same , but they are many led manfacturer and supplier .Asia manufacturer can offer the lower cost led display .In fact , people are suprising ,in these suppliers ,just only a little manufacturer can make the high qulity led diplay ,as using in a smiple way ,the low quality led lights and led display  is enogh .But in many different area ,they must get a high qulity led lights and led display ,for example ,near the high way ,some of the Military, aviation and industry zone .The led quality is more strict .

How to distinguish between high

Jun 25th, 2012 | Filed under LED Light
Lighting Your Life With Led Light

In the present scenario the current environment situation enforces people to raise their knowledge about how to make their environment friendly. With this accordance power saving comes first as natural resources are limited and hence the quest for efficient lighting energy is increasing in the current era.

Researchers always try their best to create a one which can be affordable in any circumstances. In this regard LED tube is the one of the best to lighting your life with the replacement of incandescent light & also eco-friendly. So before taking any decision we should know why we need a changeover in this field.

There are some few points which can help you to acquire knowledge about LED tube.

• First of all LED (Light emitting diode) tube produces better light than incandescent bulbs, and this is the fact that most of the offices and homes are using it.

• You might have seen that lighting of your home consumes about 20% of entire supply. So if you can lower down this, you might save your budget. It is already tested that LED tube consumes less up to 60% than incandescent bulbs.

• Incase of fluorescent light one person has to weird it

Jun 20th, 2012 | Filed under LED Light
High power the LED tunnel light application analysis

1 normal tunnel light and LED the function of the tunnel light more choice

At present the most tunnel lighting is high pressure sodium lamp as the light source, time machine but high-pressure sodium lamp uv radiation in form, color rendering, visual sensitive characteristics, power specifications, brightness control, there are many shortcomings,

Jun 18th, 2012 | Filed under LED Light
You need a Led panel light

Led Tube is made by the Led light,The light source of the led Led panel light is high brigtness white led light or warm  white led light with  some features such as high effective  ,low power ,long life ,easy to control ,non-maintenance ,safe and environmental etc .It is a new cold light source .

The Led panel light can be used in hospital ,office ,bank ,hotel and

some other place that indoor .For more features  , pls read the commonets as

Jun 12th, 2012 | Filed under LED Light

Because of their numerous advantages over traditional light sources such as halogen bulbs and other incandescent or fluorescent lights, Led lighting has conveniently replaced them for the better. The Led lights have become what you call as the lighting of the future. The modern world looks for things that are more efficient, less costly and provide a lot of benefits in one small package; Led lights seem to do just that. There is hardly a place today where you will not come across Led lights being used to illuminate the place. Visit a mall, super mart, restaurants, nightclubs or even airports and you will see Led lights illuminating the place. Pick up your rechargeable battery lights, flashlights, cell phones, toys or home appliances and you will see Led lights blinking in the indicator signals of the device or glowing in the machinery when you happen to be using it. Such is the widespread and hold of Led lights today.

Initially Led lighting sources can seem to be more costly than

Jun 8th, 2012 | Filed under LED Light
One Solution For Many Problems of LED Tube

When using a product one enjoys the advantages it provides but with that, one also has to face few disadvantages related to either its functionality or the shape and size. But one can still prefer to buy a product if there are lesser disadvantages and the benefits it provide are worth the trouble. To decrease the number of disadvantages, we notice every now and then that there is always an improved version of the specific product after some period of time. Upgrading to a better option is the reason why we have reached to our current position from our stone-age days.

One industry which has noticed a tremendous upgrade is the lighting industry. This upgrade is possible after people have realized the advantages of commercial use of LEDs. Light-Emitting-Diodes (LEDs) are small bulbs ranging from 2mm to 8mm across. LEDs emit significant amount of light not through a filament but light is

Jun 5th, 2012 | Filed under LED Light
Some technical details about Led panel light

Led Tube: Led panel light source is known as long life lamp. Solid cold light source, epoxy resin, light body and no loose parts, there is no filament light easy to burn, heat accumulation, light and rapid decline of errors errors, life of up to 50,000 to 100,000 hours, longer life than conventional light sources more than 10 times. Drive power requirements chip itself is less than 0.5w, switching frequency requirements mandate greater than the 120hz, so that while the occurrence frequency disturbance can be seen blinking.

Led panel light built-in driver IC chip package should help drive the quick cooling die, if the die (die) in the copper binding on the indirect and indirect extension of a pin to package, easy to indirect welding in the pcb board thermal conductivity of copper rapidly (Figure 1). If a similar 4x4mm silicon die on Britain to end eternal sub-300-1000ma of current, confirmed the power to determine the will heat the chip itself, the physical layout of cooling is also essential.

Led

May 30th, 2012 | Filed under LED Light
Do You Know Benefits of LED Tube Lighting

Most people are looking for ways to improve the environment. This includes scientists and researchers who have been attempting to create an alternative to the fluorescent tube lighting. This lighting is quickly being replaced with LED tube lighting which is more cost effective and environmentally friendly. The use of fluorescent tubes have grown in the last few years to include homes and offices. This is due to the fact that they are more cost effective than incandescent bulbs. They also give off better light than normal lightbulbs.

However there are some problems with fluorescent lighting. The ballast and plugs for this lighting must be wired into a home or office. Once installed it is very difficult to replace the lighting because of the ballast and plugs that are used for this tube lighting. The LED to has been designed to be a drop-in replacement for the fluorescent bulb. An individual will find that it is very easy to replace their fluorescent two with the LED and the LED is lighter than the fluorescent.

May 15th, 2012 | Filed under LED Light
You should know to protect LED Light

LED is a semiconductor device. It is easy to be damaged in the assembly process by the static electricity. This requires electrostatic protectio in the assembly process. We found that many manufacturers do not have this concept or don’t understand. W

Apr 24th, 2012 | Filed under LED Light
Some factors which could impact the Led Tube

Though the  people can get Led Tube products from many different way , but choice is also very important to consider .

Many led display desigen think all of the qulity of the led display should be the same , but they are many led manfacturer and supplier .Asia manufacturer can offer the lower cost led display .In fact , people are suprising ,in these suppliers ,just only a little manufacturer can make the high qulity led diplay ,as using in a smiple way ,the low quality led lights and led display  is enogh .But in many different area ,they must get a high qulity led lights and led display ,for example ,near the high way ,some of the Military, aviation and industry zone .The led quality is more strict .

How to distinguish between high and low led products quality ? How to know the difference with 2 different led display  ?In fact , choose a high quality Led display , it can start from the “chipset ” Then check  all of the assembly process.In this process ,they are many factor need to consider .Tier-One led company can produce the high quality led chipst .A  2 inch  wafer can cut more then 6000 pcs led chipsets.There is only individual have some difference for overall .As a excellent Led chip manufacturer ,when the produce the led chips ,they Centrifugal Fan must make sure the color,brigtness ,and valtage of the led chips just get a very smaller difference .

When the LED-chip package is complete, many of their performance may exist a great difference, such as perspective. In addition, the impact of packaging materials is quite large, for example, silicon resin performs better than the epoxy resin.

Apr 18th, 2012 | Filed under LED Light